Armscor Forum - how to recharge co2 gun properly?

« how to recharge co2 gun properly? »

Welcome Guest. Please Login or Register.
May 26, 2013, 6:56am

Armscor Forum :: Armscor Discussion :: Armscor Airguns :: how to recharge co2 gun properly?

Author

Topic: how to recharge co2 gun properly? (Read 1,429 times)

bittersquash
Make a Post ALREADY!

member is offline

Joined: Mar 2011
Gender: Male

Posts: 19

how to recharge co2 gun properly?
« Thread Started on Mar 25, 2011, 8:55pm »

wala kasi ako mabasa na article kung paano ung tamang way magrecharge ng co2 sa airgun ko na ar standard, and wala rin un sa manual ng airgun na armscor,, i need help...

Link to Post - Back to Top IP:

Logged

bats1982
Junior Member

member is offline

Joined: Sept 2010
Gender: Male

Posts: 67

Re: how to recharge co2 gun properly?
« Reply #1 on Mar 26, 2011, 2:00am »

1. With the tank, make sure that the threaded nozzle is clean and free of debris, you can also use a bit of oil or teflon tape on your threaded nozzle.
2. Fit it properly with the charging valve inlet and make clockwise turns until it is properly screwed in.
3. Hold the valve handle and turn the tank counterclockwise, if your hearing is good, you can hear CO2 flowing through your charging valve. Make sure the inlet valve doesn't leak air when you are charging. If it does, you may have not screwed in the nozzle of your tank properly or you can use a bit of teflon tape to keep CO2 air from leaking. Do not tilt your tank with the nozzle facing more than 30 degrees perpendicular to the ground. Liquid CO2 may directly leach out of your tank into the gun, this will consume your CO2 tank's air much faster.
4. At about 3 - 5 seconds you should have the reservoir of your CO2 airgun filled. Close the CO2 tank via reverse method of procedure # 3.
5. Unscrew the CO2 tank, be sure it is close before you turn it counterclockwise, a small amount of air may leach with a hissing sound just as you unscrew it but this is the air trap between the nozzle of your tank to the port of your charging valve seal.( In my opinion I guesstimate by the sound of the air escaping the pressure level of my tank which will help me decide if it needs refill)

6.. That's all, just be wary of the condition of the threaded nozzle of your tank and check if there's any debris on your charging valve inlet. If it get's inside your gun, it may clog the seals of your discharge valve. I had experience once my airgun's discharge valve was leaking air and malfunctioned. Luckily I've manage to clean it without opening the Air Chamber assembly. I just cleaned it with the charging valve unscrewed, Cleaned the reservoir, put some oil in it, charged and dry fired the gun. Luckily the debris got cleared and the discharge valve seated back properly.

Link to Post - Back to Top IP:

Logged

bittersquash
Make a Post ALREADY!

member is offline

Joined: Mar 2011
Gender: Male

Posts: 19

Re: how to recharge co2 gun properly?
« Reply #2 on Mar 30, 2011, 9:53pm »

Tnx bro! Nasolve ko na rin ung leach

Link to Post - Back to Top IP:

Logged

boloman
Make a Post ALREADY!

member is offline

Joined: Oct 2009
Gender: Male

Posts: 7

Re: how to recharge co2 gun properly?
« Reply #3 on Jun 5, 2011, 8:28pm »

petroleum based oil could damage your seals ond O rings, used silicone based oils, it can even seals small leaks.

Link to Post - Back to Top IP:

Logged

busybee
Make a Post ALREADY!

member is offline

[avatar]

Joined: Jan 2010
Gender: Male

Posts: 17

Re: how to recharge co2 gun properly?
« Reply #4 on Jun 13, 2011, 7:35pm »

just wondering, ilang shots kaya ang isang refill ng co2 sa airgun bago mag refill uli? as long as accuracy level is concerned? anyone could answer will be appreciated. tnx

Link to Post - Back to Top IP:

Logged

equalizer2011
Board Senior Member

member is offline

Stay Safe ~ Life's Good

Joined: May 2011
Gender: Male

Posts: 252
Location: Sin City

Re: how to recharge co2 gun properly?
« Reply #5 on Jul 11, 2011, 2:29pm »

I have an armscor standard air rifle. I had it since 2000. The only problem I had was a broken O ring. I had it replaced, since then, zero malfunctions. I can shoot 12 shots accurately in one fill.

Link to Post - Back to Top IP:

Logged

smile
Junior Member

member is offline

Joined: Aug 2011
Gender: Male

Posts: 53

Re: how to recharge co2 gun properly?
« Reply #6 on Sept 19, 2011, 10:33am »

good day sir equalizer2011,

tanong sana ako sayo about your experience in co2 gun leakage..mga ilang buwan nba since yung pinalitan mo ng seal/s yung gun mo na hindi pa sya nagle-leakage?
At tsaka palagay mo ba, ok lang pabayaan ang gun na my charge let say for more than 1 week, month or so?
Thanks..

Link to Post - Back to Top IP:

Logged

heightaddict
Make a Post ALREADY!

member is offline

Joined: Sept 2011
Gender: Male

Posts: 2

Re: how to recharge co2 gun properly?
« Reply #7 on Sept 20, 2011, 1:24am »

i would not use teflon during charging...

plastic packing is right material

===

it is recommended that a co2 rifle is fully charged when kept, to preserve the rubber orings.

Link to Post - Back to Top IP:

Logged

smile
Junior Member

member is offline

Joined: Aug 2011
Gender: Male

Posts: 53

Re: how to recharge co2 gun properly?
« Reply #8 on Sept 22, 2011, 5:00pm »

sir height, sa experience mo, mga ilang months bago mag leak yung co2 gun mo pg pinapabayaan mo cya naka charge ng co2?

thanks

Link to Post - Back to Top IP:

Logged

bulik
Skilled Member

member is offline

Joined: Jul 2011
Gender: Male

Posts: 858

Re: how to recharge co2 gun properly?
« Reply #9 on Sept 22, 2011, 5:08pm »

sa akin more than 2 years, nagulat ako ng minsan naisipan ko uling gamitin okay pa rin nagka problema lang ng mag-charge ulit ako ng CO2 I forgor to check the intake valve tinirahan na pala ng insect eh, pero ng kalasin ko at linisin yung dumi ok na ulit until now walang problema nalabas. The number of shot per charge mo ay depende sa karga ng tangke mo, syempre kung kunti na ang laman ng tangke kunting putok na lang per charge yun. I always keep three tanks para di nauubusan.

Link to Post - Back to Top IP:

Logged

smile
Junior Member

member is offline

Joined: Aug 2011
Gender: Male

Posts: 53

Re: how to recharge co2 gun properly?
« Reply #10 on Sept 22, 2011, 11:08pm »

bulik,

ok yung airgun mo ah.. bro, anong gamit mong seal sa exhaust valve nya,90 durometer urethane rubber ba?at tsaka simple brand lang din ba ng o-ring ang ginagamit mo?

Thanks..

Link to Post - Back to Top IP:

Logged

bulik
Skilled Member

member is offline

Joined: Jul 2011
Gender: Male

Posts: 858

Re: how to recharge co2 gun properly?
« Reply #11 on Sept 23, 2011, 11:52am »

Sept 22, 2011, 11:08pm, smile wrote:

bulik,

ok yung airgun mo ah.. bro, anong gamit mong seal sa exhaust valve nya,90 durometer urethane rubber ba?at tsaka simple brand lang din ba ng o-ring ang ginagamit mo?

Thanks..

I don't know the brand, ito na kasi ang nakakabit ng makuha ko. And before I forgot, 2nd hand pa ang rifle na ito. Ibinayad lang kasi ito nung isa namin employee na nag-over vale. Ala pa akong pinapalitan dito maliban sa strap.

Link to Post - Back to Top IP:

Logged

Click Here To Make This Board Ad-Free